Connecting the mic to more than one device

You can connect the Audigo mic to up to four iOS or Android devices, but the mic can only be used with one device at a time. 

To pair the mic with an additional iOS or Android device, start by downloading the Audigo Studio app on the new device. Make sure that you are closed out of the app on all previously paired devices. Then put the microphone into Bluetooth pairing mode to connect to that new device.

To do this, hold down on the power button in the mic until the LED turns blue. Resetting to pairing mode may take up to 20 seconds. During reset, the LED will go from white, to off, to white again, and finally blue after about 20 seconds. 

Launch the Audigo Studio app on the new device and follow the set up prompts on the screen. If the mic goes to sleep during the app set up, just tap the button on the front to bring up the blue light again. 

If you have already set up the Audigo Studio app on the new iOS or Android device, tap    in the upper right of the app when the LED on the mic is blue, then tap . When your mic appears in the list of available mics, tap pair.

You can now open and close the Audigo Studio apps on each device to connect to the mic. The mic should connect automatically, but if not, just tap the    in the upper right of the app and then tap Connect.