How do I connect the mic to a different phone?

You can connect the Audigo mic to up to four iOS or Android devices. When your mic is paired to multiple devices, you can switch between devices by just closing out of the Audigo app on one device and opening the app on another device.

To pair an additional iOS or Android device, start by downloading the Audigo Studio app on the new device. Make sure that you are closed out of the app on all previously paired devices. Then put the microphone into Bluetooth pairing mode to connect to that new device.

To do this, hold down on the power button in the mic until the LED turns blue. Resetting to pairing mode may take up to 20 seconds. During reset, the LED will go from white, to off, to white again, and finally blue after about 20 seconds. 

Launch the Audigo Studio app on the new device and follow the set up prompts on the screen. If the mic goes to sleep during the app set up, just tap the button on the front to bring up the blue light again. 

If you have already set up the Audigo Studio app on the new iOS or Android device, tap    in the upper right of the app when the LED on the mic is blue, then tap . When your mic appears in the list of available mics, tap pair.

Once you have paired an iOS or Android device to a mic, that device will remember that mic: even if you quit the Audigo Studio app, when you relaunch the app, the mic and app will automatically connect.